Datasheet

• Heated asphalt container:
• Capacity 3-cubic Meters
• Double wall constructed, 4’’ insulated
• 4", 12 lb. density insulation
• 3/16’’ interior sides, 12 GA HR exterior
• Heated Container
• Asphalt walls have an inclination of 80° (sloping walls)
• Top loading doors are 4" double walls constructed fully insulated
• Doors are hydraulically operated with a rear panel control
• Double control in chassis cab
• Material funneled to center of container
• Hydraulic controls located at left rear corner
• Material discharged by auger conveyor system
• Auger shall be 8 feet long, located at center of container
• Auger is supported at each end with sealed bearings
• Variable speed hydraulic motor
• Forward and reverse controls

• Asphalt Heater:
• Heated Chambers totally enclosed, located on both side of asphalt container
• Controlled by thermostat range of 100° to 310° F°
• Diesel burner mounted on both side with independent controller
• Burner capacity: 200,000 to 500,000 BTU
• Water tight control panel

• Hand Torch:
• Capacity: 200,000 BTU
• 50 lbs propane bottle C/W 25 foot hose supplied

• Lubricant diesel Pump:
• 12 VDC pump
• Connected to diesel tank
• 25 ft. hose with gun and wand
• Used to lubricate asphalt inner container and tools

• Cab Controls:
• Inside cab control
• Operate top lids
• Burner heater control

• Arrow Board:
• Arrow - left, right, or both
• Mounted at rear of unit

• Beacon light

• Fire Extinguisher:

• Portable Mechanic Broom:
• Mechanic broom rack and support.
• Mounted on left, rear of container.

• Compactor Lift Platform:
• Hydraulic platform located on right rear

• Hydraulic Tool Circuit: OPTIONAL
• 25 foot dual hose
• Quick couplers
• Relief valve
• Pressure gauge

• Tool Box:
• Dimensions: 19"W x 36"L x 19"H
• Trays on both side of container10"W x 96"L x 8"H

• Spoils Bin:
• Dimensions: 36"W x 24"L x 20"H
• On passenger side

• Water Tank:
• 10 gallon located on passenger side

• Pivotal asphalt Chute:
• Chute mounted at rear
• 90° pivot